First
things first: the (still unnamed) Australian made watch survived its
first week . Very pleased to report that its daily error is less than 3
seconds per day. As you would imagine, I am wearing it myself with a
great sense of achievement and pride. It’s a conversational piece to say
the least. Encouraged by prototype production, we are cautiously steaming ahead.
One more set of plates was machined, jewelled and assembled over the
weekend and today I am assembling the first numbered mechanism.
The
plan is simple: to machine and assemble 20 mechanisms by Christmas,
have them running, test them, and learn as much as possible about the
repeatability of the manufacturing process. This process cannot be
rushed. There are countless unknowns yet to be figured out. For example:
how many parts can we machine with one cutting tool? To answer
that question you need to know acceptable part tolerances. Which in
itself is a critical piece of information no-one can tell you. There is
no such a thing as a book titled
"How To Make A Watch?" You can spend your entire life working
for Rolex or Patek and you would be good in making one component while
being practically clueless about the big picture. And, quite frankly,
no-one in Switzerland will want to share their best guarded secrets with
you.
That
means we have to rely on ourselves. It also means taking countless
measurements, gathering data, comparing and analysing. For example, my
rule is to reject any parts coming from Brookvale which are not
accompanied with a drawing and critical measurements. Here is just one
example of the escapement section of the main plate. The first column is
design values, the second the actual machining result. The difference
is 1 to 4
microns. The distance between the centre wheel and pallets bridge pin is
11535 microns and we are just 3 microns off. You don't have to be an
engineer to appreciate this level of precision.
So one day, the NH watch will not only come with the marking on the dial “Machined in Australia" but you, the owner and guardian, will have a technical drawing and measurements of its heart. Each component we make in our workshop will be individually numbered and signed, hand finished and fine-tuned. Your watch will be truly unique, with a story you will be proud to share. A story like no other.
Possible? Sure it is - I am wearing such a watch right now.
So one day, the NH watch will not only come with the marking on the dial “Machined in Australia" but you, the owner and guardian, will have a technical drawing and measurements of its heart. Each component we make in our workshop will be individually numbered and signed, hand finished and fine-tuned. Your watch will be truly unique, with a story you will be proud to share. A story like no other.
Possible? Sure it is - I am wearing such a watch right now.
No comments:
Post a Comment